Pumps

The Wilson WCPC-200 is a Single-Phase Centrifugal Pump

It Features a Housing Made from Heavy Duty Cast Iron a Brass Impeller and a Stainless-Steel Shaft

It is Mainly Used for Water Supply Systems, Pressure Boosting Systems, Fire-Fighting Applications and Irrigation and Can Withstand Temperatures Up to +60 °C

The Wilson WCPC-200 has a Power Output of 2 Horsepower Providing a Maximum Head of 45 Meters and a Maximum Capacity of 135 Liters per Minute

SKT13273

The Calpeda SPA 11 is a Single-Phase Single Impeller Self-Draining Whirlpool Pump

It is Made from Heavy Duty Plastic Materials, Corrosion and Sand Erosion Resistant and a Stainless-Steel Diffuser

It is Mainly Used for Water Circulation in Swimming Pool Filtration Systems and Can Withstand Temperatures Up to 60 °C

The SPA 11 has a Power Output of 0.6 Horsepower a Maximum Head of 12 Meters and a Maximum Capacity of 216 Liters per Minute

The Calpeda MXHM 202E is a Single-Phase Horizontal Multi-Stage Close-Coupled Pump

It Features a Casing, an Impeller, and a Shaft That is All Made from Heavy Duty Stainless-Steel

It is Mainly Used for Water Supply, Domestic Use, Civil and Industrial Applications, Garden and Irrigation and Can Withstand Temperatures Ranging from -15 °C to 110 °C

The Calpeda MXHM 202 has a Power Output of 0.45 Horsepower a Maximum Head of 22 Meters and a Maximum Capacity of 80 Liters per Minute

The Calpeda MXHM 203E is a Single-Phase Horizontal Multi-Stage Stainless Steel Booster Pump for water supply and pressure boosting applications.

The MXHM 203E features 0.45 kW Power with AISI 304 Stainless Construction, delivering up to 80 l/min Flow and 33 m Head at 2900 rpm.

In addition, it supports -15 to +110°C Liquids, 8 bar Pressure, IP54 Protection, and continuous duty for reliable domestic and industrial use.

Calpeda GM10 is a Single-Phase Submersible Drainage Pump.

It is Made from Heavy Duty Rustproof Composite Polymers That are Resistant to Corrosion and Internal/External Strain

Its primary uses Draining Flooded Rooms or Tanks, Water Extraction from Ponds, and Irrigation. It Can Withstand Temperatures up to +35 °C

The GM10 has a Motor Output of 0.4 Horsepower, a Maximum Head of 7.5 Meters, a Maximum Capacity of 200 Liters per Minute and an Immersion Depth of 5 Meters

The Wilson WM(S)H4-40 is a Single-Phase Horizontal Multi-Stage Stainless-Steel Centrifugal Pump

It is Mainly Used for Water Supply Sytems, Heating and Air-Conditioning, and Irrigation and Can Withstand Temperatures Between -15 °C to +105 °C

The Wilson WM(S)H4-40 has a Power Output of 1 Horsepower a Maximum Head of 36 Meters and a Maximum Capacity of 117 Liters per Minute

SKT13254

The Wilson WM(S)H4-30 is a Single-Phase Horizontal Multi-Stage Stainless-Steel Centrifugal Pump

It is Mainly Used for Water Supply Sytems, Heating and Air-Conditioning, and Irrigation and Can Withstand Temperatures Between -15 °C to +105 °C

The Wilson WM(S)H4-30 has a Power Output of 1 Horsepower a Maximum Head of 27 Meters and a Maximum Capacity of 116.6 Liters per Minute

SKT13256

The Calpeda MXH 202E is a Three-Phase Horizontal Multi-Stage Stainless Steel Booster Pump for water supply and pressure boosting applications.

The MXH 202E features 0.33 kW Power with AISI 304 Stainless Construction, delivering up to 80 l/min Flow and 22 m Head at 2900 rpm.

In addition, it supports -15 to +110°C Liquids, 8-10 bar Pressure, IP54 Protection, and continuous duty for reliable domestic and industrial use.

The Calpeda NMM 2/AA is a Single-Phase Close-Coupled Single Impeller Centrifugal Pump

It Features a Casing and Lantern Bracket That is Made from Heavy Duty Cast Iron a Brass Impeller and Steel Shaft

It is Mainly Used for Water Supply, Heating, Air-Conditioning, Cooling and Circulating Plants, Fire Fighting and Irrigarion and Can Withstand Temperatures Ranging from -10 °C to 90 °C

The NMM 2/AA has a Power Output of 1 Horsepower a Maximum Head of 33.5 Meters and a Maximum Capacity of 100 Liters per Minute

The Wilson WM(S)H2-60 is a Single-Phase Horizontal Multi-Stage Stainless-Steel Centrifugal Pump

It is Mainly Used for Water Supply Sytems, Heating and Air-Conditioning, and Irrigation and Can Withstand Temperatures Between -15 °C to +105 °C

The Wilson WM(S)H2-60 has a Power Output of 1 Horsepower a Maximum Head of 50 Meters and a Maximum Capacity of 58 Liters per Minute

SKT13258

The Wilson WCPC-150 is a Single-Phase Centrifugal Pump

It Features a Housing Made from Heavy Duty Cast Iron a Brass Impeller and a Stainless-Steel Shaft

It is Mainly Used for Water Supply Sytems, Pressure Boosting Systems, Fire-Fighting Applications and Irrigation and Can Withstand Temperatures Up to +60 °C

The Wilson WCPC-150 has a Power Output of 1.5 Horsepower Providing a Maximum Head of 38 Meters and a Maximum Capacity of 120 Liters per Minute

SKT13271

The Calpeda NCE PS2 20-70/130 is an Energy-Saving Hot Water Circulator Pump for sanitary systems and heating.

The NCE PS2 20-70/130 features 47W Permanent Magnet Motor with variable speed, delivering up to 2.7 m³/h Flow and 7 m Head on G1 Ports (130 mm).

In addition, it supports +5 to +65°C Liquids, ≤43 dB Noise, and 3 bar Max Pressure for quiet, efficient operation.

The Calpeda NMM 2/B/A is a Close-Coupled Single Impeller Single-Phase Centrifugal Pump

It Features a Casing and Lantern Bracket That is Made from Heavy Duty Cast Iron a Brass Impeller and Steel Shaft

It is Mainly Used for Water Supply, Heating, Air-Conditioning, Cooling and Circulating Plants, Fire Fighting and Irrigation and Can Withstand Temperatures Ranging from -10 °C to 90 °C

The NMM 2/B/A has a Power Output of 0.75 Horsepower a Maximum Head of 31 Meters and a Maximum Capacity of 80 Liters per Minute

The Wilson WCIR25-6 is a Single-Phase Stainless-Steel Circulation Pump

It is Used for Hot/Cold Water Circulation, Air-Conditioning, Pool & SPA Systems

It has a Power Output of 93 W a Maximum Head of 6 Meters and a Maximum Capacity of 55 Liters per Minute

SKT13295

The Calpeda B-CTM 61 is a Single-Phase Bronze Close-Coupled Peripheral Pump with turbine impeller for clean liquids without abrasives, ideal for pressure boosting, cooling/air-conditioning systems, and circulation.

The B-CTM 61 features 0.33 kW Power with Bronze Casing and Brass Impeller, delivering up to 38 l/min Flow and 41 m Head at 2900 rpm.

In addition, it supports -10 to +60°C Liquids, up to 6 bar Pressure, IP54 Protection, 7 m Suction Lift, and continuous duty.

The Wilson WM(S)H2-40 is a Single-Phase Horizontal Multi-Stage Stainless-Steel Centrifugal Pump

It is Mainly Used for Water Supply Sytems, Heating and Air-Conditioning, and Irrigation and Can Withstand Temperatures Between -15 °C to +105 °C

The Wilson WM(S)H2-30 has a Power Output of 0.75 Horsepower a Maximum Head of 35 Meters and a Maximum Capacity of 58 Liters per Minute

SKT13260

The Halm BUPA 25-6.0U130 is a Domestic Water Circulation Pump

It Features a Pump Body Made of Bronze a Ceramic Shaft and Polysulfone Plastic Impeller

It is Mainly Used for Drinking Water Circulation Systems, Heating Systems and Can Withstand Temperatures up to 110 °C

The Halm BUPA has a Maximum Power Output of 90 Watts Providing Maximum Head of 1.25 Meters and Maximum Capacity of 22 Liters per Minute

Hwasdan H50ZB28-4.3Q is a robust 2-inch petrol water pump powered by a 6.5 HP 4-stroke engine,

delivering a maximum flow rate of 30,000 liters per hour (30 m³/h), a maximum lift of 28 meters, and a suction head of 7 meters.

Designed for efficient water transfer in agriculture, irrigation, drainage, and general pumping tasks, this pump combines high capacity with reliable performance for demanding outdoor applications.

SKT12357

The Calpeda NCS3 25-40/130 is a 3-Speed Bronze Circulator Pump for sanitary hot water recirculation.

The NCS3 25-40/130 features G1 1/2" Threaded Ports (130 mm spacing) with Bronze Casing, delivering up to 4.2 m³/h Flow and 6.8 m Head.

In addition, it supports +5 to +65°C Liquids, ≤45 dB Noise, 10 bar Pressure, and 230V single-phase operation with IP44 protection.

The Calpeda CTM 60/A is a Single-Phase Peripheral Pump for domestic water boosting and circulation.

The CTM 60/A features 0.33 kW Power with Cast Iron Casing and Brass Impeller, delivering up to 41 m Head and 2.3 m³/h Flow.

In addition, it supports 60°C Liquids, 7 m Suction Lift, and 230V Operation with thermal protection for reliable continuous duty.

Calpeda CTM61 is a Single-Phase Close-Coupled Peripheral Pump with Turbine Impeller.

It Features a Cast Iron Casing, Brass Impeller, Casing Cover, and a Chrome Steel Shaft. Its primary uses are Water Supply, Increasing Network Pressure, Cooling and Air-Conditioning Systems, and Can Withstand Temperatures up to +60 °C

The CTM61 has a Power Output of 0.45 Horsepower, a Maximum Head of 41 Meters and a Maximum Capacity of 38 Liters per Minute

The Idromat 5-22 is a Regulation Device for Pump Control.

It is Used for Water Supply, Increase of Network Pressure and Protection Against Pump Dry Running.

The Wilson WPC-50 is a Single-Phase Centrifugal Pump

It Features a Housing Made from Heavy Duty Cast Iron a Brass Impeller and a Stainless-Steel Shaft

It is Mainly Used for Water Supply Sytems, Pressure Boosting Systems, Fire-Fighting Applications and Irrigation and Can Withstand Temperatures Up to +60 °C

The Wilson WPC-50 has a Power Output of 0.5 Horsepower a Maximum Head of 35 Meters and a Maximum Capacity of 35 Liters per Minute

SKT13265

The Wilson PR-Matic One is a Regulation Device for Pump Control

It is Used for Water Supply, Increase of Network Pressure, Protection Against Pump Dry Running

SKT13341