Calpeda

Calpeda CTM61 is a Single-Phase Close-Coupled Peripheral Pump with Turbine Impeller.

It Features a Cast Iron Casing, Brass Impeller, Casing Cover, and a Chrome Steel Shaft. Its primary uses are Water Supply, Increasing Network Pressure, Cooling and Air-Conditioning Systems, and Can Withstand Temperatures up to +60 °C

The CTM61 has a Power Output of 0.45 Horsepower, a Maximum Head of 41 Meters and a Maximum Capacity of 38 Liters per Minute

Calpeda GM10 is a Single-Phase Submersible Drainage Pump.

It is Made from Heavy Duty Rustproof Composite Polymers That are Resistant to Corrosion and Internal/External Strain

Its primary uses Draining Flooded Rooms or Tanks, Water Extraction from Ponds, and Irrigation. It Can Withstand Temperatures up to +35 °C

The GM10 has a Motor Output of 0.4 Horsepower, a Maximum Head of 7.5 Meters, a Maximum Capacity of 200 Liters per Minute and an Immersion Depth of 5 Meters

The Idromat 5-22 is a Regulation Device for Pump Control.

It is Used for Water Supply, Increase of Network Pressure and Protection Against Pump Dry Running.

Calpeda MPC 41 is a Three-Phase Self-Priming Swimming Pool Pump with Built-In Strainer

It is Made from Heavy Duty Corrosion and Sand Erosion Resistant Plastic Materials and a Stainless-Steel Diffuser

It is Used for Water Circulation in Swimming Pool Filtration Systems and Can Withstand Temperatures Up to 60 °C

The MPC 41 has a Power Output of 1.5 Horsepower, a Maximum Head of 16.4 Meters and a Maximum Capacity of 350 Liters per Minute

Calpeda MPC 71/B is a Three-Phase Self-Priming Swimming Pool Pump with Built-In Strainer.

It is Made from Heavy Duty Corrosion and Sand Erosion Resistant Plastic Materials, and a Stainless-Steel Diffuser

It is Used for Water Circulation in Swimming Pool Filtration Systems and Can Withstand Temperatures Up to 60 °C

The MPC 71/B has a Power Output of 3 Horsepower, a Maximum Head of 18 Meters, and a Maximum Capacity of 667 Liters per Minute

Calpeda MPCM 41 is a Single-Phase Self-Priming Swimming Pool Pump with Built-In Strainer.

It is Made from Heavy Duty Corrosion and Sand Erosion Resistant Plastic Materials, and a Stainless-Steel Diffuser

It is Used for Water Circulation in Swimming Pool Filtration Systems and Can Withstand Temperatures Up to 60 °C

The MPCM 41 has a Power Output of 1.5 Horsepower, a Maximum Head of 16.4 Meters, and a Maximum Capacity of 350 Liters per Minute

Calpeda MPCM 61 is a Single-Phase Self-Priming Swimming Pool Pump with Built-In Strainer.

It is Made from Heavy Duty Corrosion and Sand Erosion Resistant Plastic Materials, and a Stainless-Steel Diffuser

It is Used for Water Circulation in Swimming Pool Filtration Systems and Can Withstand Temperatures Up to 60 °C

The MPCM 61 has a Power Output of 2 Horsepower, a Maximum Head of 14 Meters, and a Maximum Capacity of 567 Liters per Minute

Calpeda MXHM 204 is a Single-Phase Horizontal Multi-Stage Close-Coupled Pump.

It Features a Casing, an Impeller, and a Shaft That is All Made from Heavy Duty Stainless-Steel

It is Mainly Used for Water Supply, Domestic Use, Civil and Industrial Applications, Garden and Irrigation and Can Withstand Temperatures Ranging from -15 °C to 110 °C

The MXHM 204 has a Power Output of 0.75 Horsepower has a Maximum Head of 45 Meters, and a Maximum Capacity of 80 Liters per Minute

Calpeda MXHM 404 is a Single-Phase Horizontal Multi-Stage Close-Coupled Pump.

It Features a Casing, an Impeller, and a Shaft That are All Made from Heavy Duty Stainless-Steel

It is Mainly Used for Water Supply, Domestic Use, Civil and Industrial Applications, Garden and Irrigation and Can Withstand Temperatures Ranging from -15 °C to 110 °C

The MXHM 404 has a Power Output of 1 Horsepower, a Maximum Head of 44.5 Meters, and a Maximum Capacity of 133 Liters per Minute

The Calpeda MXV 50-1504 is a Three-Phase Vertical Multi-Stage In-Line Pump

The Pump's Shaft, Impeller, Casings and Covers are All Made from Heavy Duty Stainless-Steel

It is Mainly Used for Water Supply Systems, Pressure Boosting Systems, Fire-Extinguishing Systems and Irrigation and Can Withstand Temperatures Ranging Between -15 °C to +120 °C

The MXV 50-1504 has 4 Stages with a Power Output of 4 Horsepower a Maximum Head of 58 Meters and a Maximum Capacity of 400 Liters per Minute

The Calpeda MXV 50-1505 is a Three-Phase Vertical Multi-Stage In-Line Pump

The Pump's Shaft, Impeller, Casings and Covers are All Made from Heavy Duty Stainless-Steel

It is Mainly Used for Water Supply Systems, Pressure Boosting Systems, Fire-Extinguishing Systems and Irrigation and Can Withstand Temperatures Ranging Between -15 °C to +120 °C

The MXV 50-1505 has 5 Stages with a Power Output of 5.5 Horsepower a Maximum Head of 72.5 Meters and a Maximum Capacity of 400 Liters per Minute

The Calpeda MXV 50-1510 is a Three-Phase Vertical Multi-Stage In-Line Pump

The Pump's Shaft, Impeller, Casings and Covers are All Made from Heavy Duty Stainless-Steel

It is Mainly Used for Water Supply Systems, Pressure Boosting Systems, Fire-Extinguishing Systems and Irrigation and Can Withstand Temperatures Ranging Between -15 °C to +120 °C

The MXV 50-1510 has 10 Stages with a Power Output of 10 Horsepower a Maximum Head of 141 Meters and a Maximum Capacity of 400 Liters per Minute

The Calpeda MXV 50-1517 is a Three-Phase Vertical Multi-Stage In-Line Pump

The Pump's Shaft, Impeller, Casings and Covers are All Made from Heavy Duty Stainless-Steel

It is Mainly Used for Water Supply Systems, Pressure Boosting Systems, Fire-Extinguishing Systems and Irrigation and Can Withstand Temperatures Ranging Between -15 °C to +120 °C

The MXV 50-1517 has 17 Stages with a Power Output of 20 Horsepower a Maximum Head of 245 Meters and a Maximum Capacity of 400 Liters per Minute

The Calpeda NGM 3/A is a Single-Phase Close-Coupled Self-Priming Pump with Built-In Ejector

It Features a Casing and a Diffuser Plate that are Made from Heavy Duty Cast Iron a Brass Impeller and Chrome-Steel Shaft

It is Mainly Used for Drawing Water from a Well, Pressure Boosting Systems, Garden and Jet Washing and Can Withstand Temperatures up to 40 °C

The NGM 3/A has a Power Output of 0.75 Horsepower a Maximum Head of 49 Meters and a Maximum Capacity of 50 Liters per Minute

The Calpeda NGM 4/A is a Single-Phase Close-Coupled Self-Priming Pump with Built-In Ejector

It Features a Casing and a Diffuser Plate that are Made from Heavy Duty Cast Iron a Brass Impeller and Chrome-Steel Shaft

It is Mainly Used for Drawing Water from a Well, Pressure Boosting Systems, Garden and Jet Washing and Can Withstand Temperatures up to 40 °C

The NGM 4/A has a Power Output of 1 Horsepower a Maximum Head of 41 Meters and a Maximum Capacity of 66.6 Liters per Minute

The Calpeda NGM 5/16E is a Single-Phase Close-Coupled Self-Priming Pump with Built-In Ejector

It Features a Casing and a Diffuser Plate that are Made from Heavy Duty Cast Iron a Brass Impeller and Chrome-Nickel Steel Shaft

It is Mainly Used for Drawing Water from a Well, Pressure Boosting Systems, Garden and Jet Washing and Can Withstand Temperatures up to 40 °C

The NGM 5/16E has a Power Output of 1.5 Horsepower a Maximum Head of 59 Meters and a Maximum Capacity of 75 Liters per Minute

The Calpeda NM 11A/A is a Close-Coupled Single Impeller Three-Phase Centrifugal Pump

It Features a Casing and Lantern Bracket That are Made from Heavy Duty Cast Iron a Brass Impeller and Chrome-Nickel Steel Shaft

It is Mainly Used for Water Supply, Heating, Air-Conditioning, Cooling and Circulating Plants, Fire Fighting and Irrigarion and Can Withstand Temperatures Ranging from -10 °C to 90 °C

The NM 11A/A has a Power Output of 3 Horsepower a Maximum Head of 35.5 Meters and a Maximum Capacity of 280 Liters per Minute

The Calpeda NM 12/A is a Close-Coupled Single Impeller Three-Phase Centrifugal Pump

It Features a Casing and Lantern Bracket That are Made from Heavy Duty Cast Iron a Brass Impeller and Chrome-Nickel Steel Shaft

It is Mainly Used for Water Supply, Heating, Air-Conditioning, Cooling and Circulating Plants, Fire Fighting and Irrigation and Can Withstand Temperatures Ranging from -10 °C to 90 °C

The NM 12A/B has a Power Output of 5.5 Horsepower a Maximum Head of 57.5 Meters and a Maximum Capacity of 280 Liters per Minute

The Calpeda NM 32/20A/B is a Close-Coupled Single Impeller Three-Phase Centrifugal Pump with Flanged Connections

It Features a Casing and Lantern Bracket That is Made from Heavy Duty Cast Iron a Brass Impeller and Stainless-Steel Shaft

It is Mainly Used for Water Supply, Heating, Air-Conditioning, Cooling and Circulating Plants, Fire Fighting, and Irrigation and Can Operate Within Temperatures Ranging from -10 °C to 90 °C

The NM32/20A/A has a Power Output of 5.5 Horsepower a Maximum Head of 57.5 Meters and a Maximum Capacity of 250 Liters per Minute

The Calpeda NM 65/20B is a Close-Coupled Single Impeller Three-Phase Centrifugal Pump with Flanged Connections

It Features a Casing, Lantern Bracket and an Impeller That is Made from Heavy Duty Cast Iron, and Stainless-Steel Shaft

It is Mainly Used for Water Supply, Heating, Air-Conditioning, Cooling and Circulating Plants, Fire Fighting and Irrigarion and Can Operate Within Temperatures Ranging from -10 °C to +90 °C

The NM 65/20B/B has a Power Output of 25 Horsepower a Maximum Head of 50 Meters and a Maximum Capacity of 2,200 Liters per Minute

The Calpeda NM 80/16C/C is a Close-Coupled Single Impeller Three-Phase Centrifugal Pump with Flanged Connections

It Features a Casing, Lantern Bracket and an Impeller That is Made from Heavy Duty Cast Iron, and Stainless-Steel Shaft

It is Mainly Used for Water Supply, Heating, Air-Conditioning, Cooling and Circulating Plants, Fire Fighting and Irrigation and Can Operate Within Temperatures Ranging from -10 °C to +90 °C

The NM 80/16C/C has a Power Output of 15 Horsepower a Maximum Head of 28.7 Meters and a Maximum Capacity of 3,000 Liters per Minute

The Calpeda NM 80/16E is a Close-Coupled Single Impeller Three-Phase Centrifugal Pump with Flange Connections

It Features a Casing, Lantern Bracket and an Impeller That is Made from Heavy Duty Cast Iron, and Stainless-Steel Shaft

It is Mainly Used for Water Supply, Heating, Air-Conditioning, Cooling and Circulating Plants, Fire Fighting and Irrigation and Can Operate Within Temperatures Ranging from -10 °C to +90 °C

The NM 80/16E/B has Power Output of 10 Horsepower a Maximum Head of 21.5 Meters and a Maximum Capacity of 2,800 Liters per Minute

The Calpeda NMD 40/180C/A is a Close-Coupled Three-Phase Centrifugal Pump with Back-to-Back Impellers

It Features a Casing and Lantern Bracket Made from Cast Iron a Brass Impeller and a Stainless-Steel Shaft

It is Mainly Used for Water Supply, Heating and Air-Conditioning, Cooling and Circulation Plants and Can Withstand Temperatures Between -10 °C to +90 °C

The NMD 40/180C/A has a Power Output of 7.5 Horsepower a Maximum Head of 69 Meters and a Maximum Capacity of 400 Liters per Minute

The Calpeda NMD 40/180D/B is a Close-Coupled Three-Phase Centrifugal Pump with Back-to-Back Impellers

It Features a Casing and Lantern Bracket Made from Cast Iron a Brass Impeller and a Stainless-Steel Shaft

It is Mainly Used for Water Supply, Heating and Air-Conditioning, Cooling and Circulation Plants and Can Withstand Temperatures Between -10 °C to +90 °C

The NMD 40/180D/B a Power Output of 5.5 Horsepowerhas a Maximum Head of 60 Meters and a Maximum Capacity of 400 Liters per Minute